Switching Mode Power Supply

Product Details:

We are able to gain immense expertise in delivering 2 KW Switching Mode Power Supply to our clients. The offered range possesses a built-in active PFC function. Known among the clients for protecting against short circuit, overload and over voltage, the offered range is available with three years of warranty.

Features of these products are mentioned below:

• Built-in constant current limiting circuit

Product Details:

• 1U low profile
• Built-in active PFC
• Fan-less design

• USP-150 / USP-225 / USP-350 / USP-500

Product Details:

• Different voltages
• Current combination with or without power factor
• Option available in open frame construction also

Product Details:

In order to comprehend and meet the diverse requirements of esteemed clients, we are able to offer 960 W Switching Mode Power Supply. The offered range is known to be equipped with on DIN rail TS-35/7.5 or 15. The offered range enables cooling by free air convection. The offered range is appreciated for its 100% full load burn-in test and reliability.

Features:

• Universal AC/DC input/full range

• Protections : Short circuit/overload/over voltage/over temperature

• UL 508(industrial control equipment) approved

Product Details:

We are a renowned organization, which is engaged in delivering 200 W Switching Mode Power Supply to respectable clients. The offered range is known for possessing 00% full load burn-in test. These products are known for withstanding 5G vibration test, high efficiency, long life and reliability.

Features of these products are suitably mentioned below:

• Universal AC input/full range

• Long life electrolytic capacitors

• Protections : Short circuit/overload/over voltage/over temperature

• Cooling by free air convection

Product Details:

• Single : SP-75 / SP-100 / SP-150 / SP-200 / SP-240 / SP-320 / SP-480 / SP-500 / SP-750 / PSP-600
• Triple : TP-75 / TP-100 / TP-150
• Quad : QP-100 / QP-150 / QP-200 / QP-320 / QP-375

Product Details:

• Economical non-PFC models
• Miniature size with complete protections
• Most economical models with complete safety certificates

Product Details:

• 10% to 100% load change measured on sense terminal
• Ripple & Noise : 0.5% (150mV Pk - Pk when measured with shortest probe lead length and 0.1uF/63V ceramic capacitor paralleled with 100uF/63V electrolytic capacitor across the probe tip.
• Output Voltage Adj. : + 2V by front panel Vadj pot   
• Output Over Voltage : 33V to 35V (Check at 10% load. (trip type) mains recycling required to restart SMPS after removing fault)
• Input Under Voltage : (Auto Recovery Type) To be checked at 10% load. Output shuts OFF when input voltage is falls down below 185vac.
• Input Over Voltage : (Auto Recovery Type) To be checked at 10% load. Output shuts OFF when input voltage goes beyond 264vac.
• Transient Response : Output should recover within 10ms for 50% step load change.
• TTL ON / OFF  : 0 - OFF;   1 – ON   (if required)
• 1O/P Current Monitoring : Scale : 70A = 10V, 67A = 9.57 (2%)
• Operating Temperature: High : 550C Operating. Derating 2.5 % per degree C
• beyond 500C output current is58A. (Unit is in OFF condition to be switched ON for last ½ an hour to take the reading), Low : - 10 % Operating.  (Unit is in OFF condition to be switched ON for last ½ an hour to take the reading).
• EMI / EMC : Will meet STD461
• Vibration : 8 – 500Hz, 1.59 peak
• Terminations : Input, Output and Logic Signals are on M S Shell connectors Such three units are fitted in 19” * 5U * 420mm (D) (Excluding front and Rear panel projection) subrack with current sharing facility (60:40) and Dual Redundant Diode fitted inside the SMPS

Product Details:

Model No./Data Link:

• HRP-75 / HRP-100 /HRP-150 / HRPG-150 / HRP-200 / HRPG-200 / HRP-300 / HRPG-300 / HRP-450 / HRPG-450 / HRP-600 / HRPG-600

Product Details:

• Non-PFC, complete protections
• Economical medium to high power models with safety certificate

Model No./Data Link:

• SE-200 / SE-350 / SE-450 / SE-600 / SE-1000 / SE-1500

Product Details:

• Miniature size, non-PFC
• High reliability, 5G vibration, 70 operation
• Suitable for critical applications

Model No./Data Link:

• Single : RS-15 / RS-25 / RS-35 / RS-50 / RS-75 / RS-100 / RS-150
• Dual : RD-35 / RD-50 / RD-65 / RD-85 / RD-125
• RID-50 / RID-65 / RID-85 / RID-125
• Triple : RT-50 / RT-65 / RT-85 / RT-125
• Quad : RQ-50 / RQ-65 / RQ-85 / RQ-125

Product Details:

Product Details:

Product Details:

• The offered range possesses high power switch mode AC to DC power supplies and is available with single & three phase input. In addition to this, the offered range is appreciated for its efficiency, precise regulation, high degree of packaging density and lightweight

• These digitronics series VSMPS are ideally utilized for engineering, defense, specific and medical usages with proven attributes. Along with this, the offered range is known for incorporating the latest advancements in electronic devices of power conversion systems

• The offered range is suitably delivered after 100% checking on different characteristics such as mechanical, electrical and environmental specifications

Features:

• Highest power per cubic inch

• Built in over voltage protection with reference to front panel adjustment

• Built in thermal protection

• Constant current

• Constant voltage with automatic crossover

• Soft start

• Series/ parallel and master – Slave operations

• External programming with voltage, current and resistance

• True zero voltage and current adjust-ability

• Power factor connector circuit on front end

Product Details:

Product Details:

Product Details:

With an immense experience and a competent team of professionals, we are able to deliver 1800 Watts Triple Output SMPS. Manufactured in strict conformation with the MIL STD 461E and defense or military grade. These products are applicable in check out systems in 2U Ht construction.

Features:

• Highly efficient

• Reliable

• Trouble-free performance